Link to Cell
Link to cell feature
You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to:
–use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception.
–talk on cellular calls even if your cellular phone is in your pocket or bag.
–enjoy cordless cellular calls even if your cellular phone plugged in and charging.
Important:
RYour cellular phone must support the Hands Free Profile (HFP) specification.
RYou may pair 2 cellular phones and 1 headset.
RThe unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line).
ROnly 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line).
RLocate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
Pairing a cellular phone
Important:
RFor more details and the list of compatible cellular phones, please visit our Web site: http://www.panasonic.com/link2cell
RBefore pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
1Handset:
For CELL 1: MMENUN (right soft key) #6241
For CELL 2: MMENUN (right soft key) #6242
RAfter the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
2Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular
phone shows PassKey confirmation on its display, follow the directions to proceed.
3Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds to complete pairing.
R When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
4MOFFN
Note:
RMake sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone’s operating instructions.
RMake sure you cancel your cellular phone’s current pairing if you want to pair it to the other line (page 16).
RThe default setting for the text message alert feature is “On(no announce)”, so when you pair your cellular phone to the base unit, this feature may be activated (page 48). (This depends on the version and type of cellular phone you are using.)
Unpairing a cellular phone
You can cancel the pairing of a cellular phone that is stored in the base unit.
1For CELL 1: MMENUN (right soft key) #6111
For CELL 2: MMENUN (right soft key) #6112
16For assistance, please visit http://www.panasonic.com/help
