Panasonic KX-TGH260 Cellular line only mode If you do not use the landline, To connect/disconnect

Link to Cell

Bluetooth devices are disconnected from the base unit. This feature allows the base unit to try to reconnect the Bluetooth devices at regular intervals when it returns within base unit range. You can set the interval. The default setting is “1 min”.

Important:

RWhen 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on.

RSome cellular phones lose connection after usage, please check the specifications of your cellular phone for more details.

1MMENUN (right soft key) #632

2 MbN: Select the desired setting.

3 MSAVEN a MOFFN

Note:

RSome cellular phones may ask you if you accept the connection requirement from the base unit. In that case, select “Off” in step 2. Check the specifications of your cellular phone.

Connecting/disconnecting the cellular phone manually

If you will not be using the paired cellular phone’s link to cell feature temporarily (for example, you do not want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the base unit.

Note:

REven if a paired cellular phone was disconnected from the base unit, if it is brought within the base unit’s range during the auto connection interval, it may automatically connect to the base unit (page 17).

RA disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is unnecessary.

1To connect/disconnect:

For CELL 1: MMENUN (right soft key) #6251

For CELL 2: MMENUN (right soft key) #6252

R A long beep sounds.

2MOFFN

Cellular line only mode (If you do not use the landline)

If you do not use the landline, we recommend setting the unit to the cellular line only mode.

Important:

RIf you turn on the “Cell line only mode”, disconnect the telephone line cord from the base unit. Otherwise the “Cell line only mode” cannot be activated.

1MMENUN (right soft key) #157

2To turn on:

MbN: “On” a MSELECTN a

MbN: “Yes” a MSELECTN

To turn off:

MbN: “Off” a MSELECTN

Note:

ROnce you set this mode, you can use the following buttons to make cellular calls for

the handset, press MN or MZN instead of MCELLN (page 20).

ROnce you set this mode, the following features cannot be used:

–Landline features (page 38)

–Answering system (page 51) Messages cannot be received.

–Voice mail features (page 58)

RAfter this mode is turned on or off, the base unit reboots.

–Bluetooth connections from cellular phones or headset are disconnected. If the auto connection is turned on (page 17), the cellular phones are reconnected.

– will be displayed on the handset momentarily. The handset can be used

once is displayed.

18For assistance, please visit http://www.panasonic.com/help