Programming
in multiple items display mode, you can switch the screen to confirm the detailed information by:
–pressing MDETAILN, or
–pressing MMENUN a MbN: “Detail” a MSELECTN
*18 You can set the handset display backlight while on charge.
–“On”: Backlight is on (dimmed).
–“Off”: Backlight turns off after 10 seconds of charging. Additionally, less power is
consumed if you leave the handset on the base unit or charger after the battery is fully charged.
*19 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*20 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to pick up the waiting call.
*21 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A” if telephone line condition is not good.
|
|
|
|
| “Weekly” | |
|
|
|
|
| ||
Alarm |
|
| ||||
|
| Alarm sounds weekly at the set time(s). |
| |||
|
| |||||
An alarm sounds at the set time for 1 minute |
| 4 | Proceed with the operation according to | |||
and is repeated 5 times at 5 minute intervals |
| |||||
(snooze function). A text memo can also be |
|
| your selection in step 3. | |||
displayed for the alarm. A total of 5 separate |
|
| n Once: | |||
alarm times can be programmed for each |
|
| Enter the desired month and date. a | |||
handset. You can set one of 3 different alarm |
|
| MOKN | |||
options (once, daily, or weekly) for each alarm |
|
| n Weekly: | |||
time. |
|
| ||||
|
| MbN: Select the desired day of the week | ||||
Important: |
|
| ||||
| 5 | and press MSELECTN. a MOKN | ||||
R Make sure the unit’s date and time setting |
| Set the desired time. | ||||
is correct (page 14). |
| 6 | *: Select “AM” or “PM”. a MOKN | |||
1 MMENUN (right soft key) #720 |
| |||||
| 7 | Enter a text memo (30 characters max.). | ||||
2 Select an alarm by pressing 1 to 5. a |
| |||||
|
| a MOKN | ||||
| MSELECTN |
| 8 | MbN: Select the desired alarm tone. a | ||
3 MbN: Select the desired alarm option. a |
|
| MSELECTN | |||
| MSELECTN |
|
| R We recommend selecting a different | ||
|
|
|
|
| ringer tone from the one used for | |
| “Off” |
|
| outside calls. | ||
| Turns alarm off. Go to step 10. |
|
| 9 | MbN: Select the desired snooze setting. | |
| ||||||
| “Once” |
|
| a MSAVEN | ||
| An alarm sounds once at the set time. |
| 10 | MSELECTN a MOFFN | ||
| ||||||
| “Daily” |
|
| Note: | ||
| An alarm sounds daily at the set time. |
| R Press MSTOPN to stop the alarm completely. | |||
| Go to step 5. |
| ||||
|
|
|
| R When the handset is in use, the alarm will | ||
|
|
| ||||
|
|
|
| not sound until the handset is in standby | ||
|
|
|
| mode. | ||
For assistance, please visit http://www.panasonic.com/help | 39 |
