Preparation
For assistance, please visit http://www.panasonic.com/phonehelp 15
Setting up the base unit

Overview

1Connect the AC adaptor.
2Connect the telephone line cord.
Refer to one of the following methods depending on your situation.
LTo connect to a 2-line telephone jack: page 16
LTo connect to 2 single-line telephone jacks: page 16
LTo connect to a single-line telephone jack: page 16
For DSL service subscribers:
LTo connect to a 2-line telephone jack: page 17
LTo connect to 2 single-line telephone jacks: page 17
3To connect to your LAN, see page 95.

Connecting the AC adaptor

Connect the AC adaptor, then raise the antennas.
LUse only the included Panasonic AC adaptor PQLV205.
Note:
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
LThe unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a Panasonic
T-adaptor (page 6).
(120 V AC, 60 Hz)
Hook
LINE1/2
LINE2
LAN