| Useful Information |
|
|
Answering system |
|
|
|
Problem | Cause & solution |
I cannot listen to | LA touch tone phone is required for remote operation. |
messages from a remote | LEnter the remote code correctly (page 83). |
location. | LThe answering system is off. Turn it on (page 84). |
|
|
The unit does not record | LThe answering system is not turned on for the line you |
new messages. | wish to record messages from. Select the desired line |
| or both lines by pressing {LINE SELECT} repeatedly, |
| then turn the answering system on (page 79, 84). |
| LThe recording time is set to “Greeting only”. Select |
| a different setting (page 85). |
| LThe message memory is full. Erase unnecessary |
| messages (page 81). |
| LThe answering system is activated for both lines, and |
| the 1st caller is leaving a voice message. The 2nd caller |
| cannot leave a message, but the caller information will |
| be stored (page 41). |
| LIf you subscribe to the Voice Mail service, messages |
| are recorded by the telephone company not your |
| telephone (page 85). |
|
|
I cannot operate the | LAnother user is operating the answering system. |
answering system. | LIf other users are talking on a conference call, you |
| cannot operate the answering system. Try again later. |
|
|
I cannot hear a message | LThe call screening feature is turned off. Turn it on (page |
from the speaker when | 85). |
the answering system is | LThe volume for the base unit is turned off. Turn the |
recording a message. | volume up by pressing {^} on the base unit. |
| LIf you pressed {^} or {V} on the base unit to adjust the |
| volume just before you listened to the message, you |
| may not be able to hear the message. Adjust the |
| volume while you are listening to the message. |
|
|
For assistance, please visit http://www.panasonic.com/phonehelp | 111 |
