FMonitoring
3[Simple Display]: Displays only a view of the room where the cordless camera is located.
4[Stored Images]: Displays stored images that the cordless camera took at the time of detection.
5[Setup]: Displays the items of the cordless camera settings.
6[Help]: Displays the help page.
Browser language
1Access the cordless camera (page 57).
2Click [Setup] tab at the top of the page.
3Click [Camera Settings].
4Select the desired setting (Default: “English”), then click {Save}.
Monitoring with your computer
j Z
1Access the cordless camera (page 57).
2Click [Standard Display] tab at the top of the page.
LThe display settings are shown on the left of the web browser. You can change them by clicking the desired setting if necessary.
3Close the web browser to stop monitoring.
Taking a picture of the displayed image while monitoring
Click [Capture] when the desired image is displayed.
LWhen you click [Capture], an additional web browser opens displaying that image. To save the image, follow the instructions on the web browser.
Cordless camera sensor j Z
The cordless camera can page your computer when it detects motion and/or sound. Then the paged computer user can answer the page to view the live video from the cordless camera.
And also, the cordless camera takes pictures (a total of 4 pictures, default) at the time of detection and stores them. You can view the images stored in the cordless camera using the computer, then select and save the desired images into the computer.
Note:
LYou can change the number of pictures
that the cordless camera takes at the time of detection (page 65).
To use this feature, select “Motion & Audio Detection”, “Motion Detection Only”, or “Audio Detection Only” in the cordless camera detection mode beforehand (page 62).
Displaying the detection pop-up message
This feature allows your computer to display the
1Start up the MULTI TALK V Camera Utility.
2Click [Sensor].
58For assistance, please visit http://www.panasonic.com/phonehelp
