Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 75
Note:
LYou can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
Flash time
The flash time depends on your telephone
exchange or host PBX.
LYou only need to program this setting
once, using either the handset or base
unit.
Important:
LThe setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
1{MENU} (F2) ixi{SELECT}
2Set tel linei{SELECT}
3Set flash timei{SELECT}
4Select the desired line.
5Select the desired setting. (Default:
700ms”) i{SAVE}i{OFF}
1{MENU}ihi{SET}
2Set tel linei{SET}
3Set flash timei{SET}
4Select the desired line.
5Select the desired setting. (Default:
700ms”) i{SET}i{STOP}
Note for handset and base unit:
LIf the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
–if k or l is not displayed on the
handset, or
–if {LINE1} or {LINE2} button light is off
on the base unit,
you need to change the line mode to “A”.
LYou only need to program this setting
once, using either the handset or base
unit.
1{MENU} (F2) ixi{SELECT}
2Set tel linei{SELECT}
3Set line modei{SELECT}
4Select the desired line.
5Select the desired setting. (Default: “B”)
i{SAVE}i{OFF}
1{MENU}ihi{SET}
2Set tel linei{SET}
3Set line modei{SET}
4Select the desired line.
5Select the desired setting. (Default: “B”)
i{SET}i{STOP}
Handset
Base unit
Handset
Base unit