Useful Information
98 For assistance, please visit http://www.panasonic.com/phonehelp
Cordless camera
The cordless camera can be mounted by the following way:
– Standard mounting
– Upside-down mounting
CAUTION:
LFor information of the cordless camera location, see page 12.
LConfirm the detection range of the cordless camera before installing the cordless
camera on the wall (page 13).
LConfirm the MAC address on the bottom of the cordless camera before installing the
wall mounting adaptor. This MAC address is needed when you use the MULTI TALK V
Camera Utility software.
LMount the cordless camera on the stable location where the unit can be adequately
supported when installing.
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
LDo not mount the cordless camera on a soft material. It may fall down, break or
cause injury.
LDo not mount the cordless camera on the following places: plaster board, ALC
(autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm (1
inch) thick, and etc.
LDo not pull the call button wire after you mount the cordless camera on the wall.
LAfter mounting the cordless camera on the wall, speak loudly and clearly into the MIC
when talking with the handset user.
Connecting the wall mounting adaptor
ASlide the cordless camera into the wall mounting adaptor in the direction of the arrow
until it clicks into the place.
BTuck the call button wire into the hole on the side of the wall mounting adaptor.
CFasten the call button wire to the hook of the wall mounting adaptor.
A
B

C