F

Monitoring

56 For assistance, please visit http://www.panasonic.com/phonehelp
Erasing all images in the cordless
camera
1Start monitoring (page 54). i
{MENU}
2Stored imagesi{SELECT}i
{MENU}iAll erasei
{SELECT}i{YES}
3Press {OFF} after “All erased” is
displayed.

Cordless camera call button

jY
The cordless camera can page the
handset when you press {Call button}.
Then the paged handset user can answer
the page to monitor the live video from the
cordless camera.
LEach of the registered compatible
Panasonic units (KX-THA12/KX-THA16/
KX-THA17) can be paged from the
cordless camera. The base unit and a
compatible Panasonic handset (KX-
THA11) cannot be paged.
1Cordless camera:
Press {Call button}.
LThe cordless camera produces a
camera tone.
LTo stop paging, press {Call button}
again.
LThe cordless camera pages the
handset for 30 seconds.
2Handset:
Press {s} to answer the page.
LYou can monitor the room where the
cordless camera is located.
LYou can also talk with the cordless
camera user. To finish talking, press
{2WAY}.
3Cordless camera:
When the handset user answers, speak
clearly into the MIC.
4Handset:
Press {OFF} to stop monitoring.
Note:
LWhen {Call button} is pressed, the
cordless camera does not take pictures.
If “Camera detect” is displayed
If you do not answer the page from the
cordless camera, “Camera detect” is
displayed on the handset.
This lets you know if you should monitor
the cordless camera which has paged you.
To monitor the cordless camera, see page
55.
To use this feature, select “Call
button” (default) in the cordless
camera detection mode beforehand
(page 62).