F

Monitoring

For assistance, please visit http://www.panasonic.com/phonehelp 53
Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby’s room, for
example, from different areas of the
house.
You can monitor:
– the sound in a room (“Audio monitor”,
page 53)
– the image and sound of a room (“Video
monitor using the handset”, page 54).
Note:
LYou can place the handset on the
charger while monitoring using the
speakerphone.

Enabling monitoring access

Yo
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
–“Permit”: allows the unit to be
monitored.
–“Deny”: denies access from other units.
1{MENU} (F2) ixi{SELECT}
2Monitor accessi{SELECT}
3Select the desired setting. (Default:
Deny”) i{SAVE}i{OFF}
1{MENU}ihi{SET}
2Monitor accessi{SET}
3Select the desired setting. (Default:
Deny”) i{SET}i{STOP}
Audio monitor
This feature allows you to listen to the
audio in the room where the handset or
base unit is located.

Monitoring audio in the room

Yo
1{MENU} (F2) iHi{SELECT}
2Audio onlyi{SELECT}
3Select the desired unit. i{SELECT}
LYou can listen to the audio.
4Press {OFF} to stop monitoring.
Note:
LTo start monitoring quickly, press
{INTERCOM}, then press {*} instead
of steps 1 and 2.
1{MENU}iFi{SET}
2Select the desired unit. i{SET}
LYou can listen to the audio.
3Press {INTERCOM} to stop monitoring.
Note:
LTo start monitoring quickly, press
{INTERCOM}, then press {*} instead
of step 1.
Handset
Base unit
Before using this feature, allow access
to the destination unit by selecting
Permit” in the monitor access setting
(page 53).
Handset
Base unit