Useful Information
43
For assistance, please visit http://www.panasonic.com/help
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Base no power
or
No link. Re-connect
base AC adaptor.
LThe handset has lost communication with the
base unit. Move closer to the base unit and try
again.
LUnplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
LThe handset’s registration may have been
canceled. Re-register the handset (page 28).
Busy LThe called unit is in use.
LOther units are in use and the system is busy.
Try again later.
LThe handset you are using is too far from the
base unit. Move closer and try again.
Call phone company for
your access # LYou have not stored the voice mail access
number. Store the number (page 38).
Check tel line LThe supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 10).
Error!! LRecording was too short. Try again.
Invalid LThere is no handset registered to the base
unit matching the handset number you
entered.
LThe handset is not registered to the base unit.
Register the handset (page 28).
Requires subscription
to Caller ID. LYou must subscribe to a Caller ID service.
Once you receive caller information after
subscribing to a Caller ID service, this
message will not be displayed.
Use rechargeable
battery. LA wrong type of battery such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page
5, 8.
TG403x.book Page 43 Wednesday, December 23, 2009 1:58 PM