Useful Information
45
For assistance, please visit http://www.panasonic.com/help
Battery recharge
Making/answering calls, intercom
Problem Cause/solution
The handset beeps and/or
) flashes.
LBattery charge is low. Fully charge the batteries
(page 10).
I fully charged the
batteries, but
) still flashes,
0 is displayed, or
the operating time
seems to be shorter.
LClean the battery ends (S, T) and the charge
contacts with a dry cloth and charge again.
LIt is time to replace the batteries (page 10).
Problem Cause/solution
_ is displayed. LThe handset is too far from the base unit. Move
closer.
LThe base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base
unit.
LThe handset is not registered to the base unit.
Register it (page 28).
Noise is heard, sound cuts
in and out.
LYou are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
LMove closer to the base unit.
LIf you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
The handset does not ring. LThe ringer volume is turned off. Adjust the ringer
volume (page 23).
LSilent mode is turned on. Turn it off (page 26).
The base unit does not
ring.
LThe ringer volume is turned off. Adjust the ringer
volume (page 16).
I cannot make a call. LThe dialing mode may be set incorrectly. Change
the setting (page 14).
LThe handset is too far from the base unit. Move
closer and try again.
I cannot make long
distance calls.
LMake sure that you have long distance service.
TG403x.book Page 45 Wednesday, December 23, 2009 1:58 PM