LSQT1174ENG.book 18 ページ 2007年1月29日 月曜日 午後1時28分

Record mode

Record mode

Check before recording

Check the following before recording important events such as weddings or when the movie camera has not been used for a long time. Conduct a test recording to make sure that the image recording and the audio recording work properly.

ªBasic camera holding

1)

2)4)

3)

5)

1)Hold the camera with both hands.

2)Run your hand through the grip belt.

3)Do not cover the microphones or sensors with your hands.

4)Keep your arms near your body.

5)Slightly open your legs.

When you are in the open air, record pictures with the sunlight as far in the background as possible. If the subject is backlit, it will become dark in the recording.

ªCheck points

Remove the lens cap. (-7-)

(When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap.)

Grip belt adjustment (-7-)

Open the LCD monitor or extend the viewfinder (Recording cannot start while the LCD monitor and the viewfinder are closed. Even if the LCD monitor and the viewfinder are closed during recording, the power will not turn off until recording stops.)

18

Adjustment of LCD monitor/viewfinder (-17-) Power supply (-8-)

Insert a cassette (-13-) Setting date/time (-10-) Setting SP/LP mode (-18-)

ªAbout auto mode

Set the [AUTO/MANUAL/FOCUS] switch to [AUTO], and colour balance (white balance) and focusing will be adjusted automatically.

Auto white balance: -46-

Auto focusing: -46-

Depending on the brightness of the subject etc., the aperature and shutter speed are automatically adjusted for an optimum brightness. (When set to the Tape recording mode: The shutter speed is adjusted to a maximum of 1/250.)

Colour balance and focus may not be adjusted depending on light sources or scenes. If so, manually adjust the white balance and focus.

AUTO

MANUAL

FOCUS

Scene mode setting (-25-) White balance setting (-26-) Shutter speed setting (-28-)

Iris/gain value setting (-28-) Focus setting (-27-)

ªRecording mode

You can switch the tape recording mode. Set to Tape Recording/Playback Mode.

1Set [BASIC] or [ADVANCED] >> [REC SPEED] >> [SP] or [LP].

If the LP mode is selected, the recording time will be 1.5 times the SP mode, but some functions will be disabled.

We recommend using the SP mode for important recording.

In order to fully exhibit the performances of the LP mode, we recommend using Panasonic cassettes marked LP mode.

In the LP mode, the picture quality will not be degraded in comparison with the SP mode, but mosaic noise may appear on the playback image or some functions may be disabled.

Playback on other digital video equipment or on digital video equipment without the LP mode.

Playback of the image on other digital video equipment recorded in the LP mode.

Frame-by-frame playback.

LSQT1174

Page 18
Image 18
Panasonic NV-GS60GN operating instructions Record mode, Check before recording