Panasonic NV-GS60GN Manual focus adjustment, To restore to the automatic Adjustment

LSQT1174ENG.book 27 ページ ２００７年１月２９日 月曜日 午後１時２８分

Record mode

ªTo restore to the automatic

adjustment

Move the joystick left or right until the [ AWB ] indication appears. Or, set the [AUTO/MANUAL/ FOCUS] switch to [AUTO].

≥When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap.

≥When setting both the white balance and the iris/gain, set the white balance first.

≥Whenever recording conditions change, re-set the white balance for correct adjustment.

ªTo set the white balance manually

Select [ ] in Step 3. Then, while viewing a white subject on the entire screen, move the joystick up to select the [ ] indication.

ªAbout flashing of the [ ] indication

When the manual adjustment mode is selected

≥Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again.

When white balance cannot be set in the manual adjustment mode

≥White balance may not be adjusted properly in the manual adjustment mode in dark places. If so, use the auto white balance mode.

During setting in the manual adjustment mode

≥When the setting is completed, it will keep lit.

ªAbout the white balance sensor

The white balance sensor detects the type of light source during recording.

≥Do not cover the white balance sensor during recording, or it may not function properly.

Manual focus adjustment

If auto focusing is difficult due to the conditions, then manual focusing is available.

≥Set to Tape Recording Mode.

1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].

AUTO

MANUAL

FOCUS

2Set the [AUTO/MANUAL/FOCUS] switch to [FOCUS].

AUTO

MANUAL

FOCUS

MF MNL

≥The [ MNL ] indication and the manual focus [MF] indication is displayed.

3Move the joystick left or right in order to adjust the focus.

MF MNL

≥When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it.

ªTo restore to the automatic

adjustment

Set the [AUTO/MANUAL/FOCUS] switch to [AUTO] or [FOCUS].

27

LSQT1174