Before using
7
LSQT1174
Fitting the lens cap
Fit the lens cap to protect the surface of the lens.
1The lens cap and lens cap cord comes
preattached to the grip belt.
Pass the end of the lens cap cord through
the attached eye on the lens cap. Then pass
the lens cap through the loop made by itself
and pull tight.
≥When not using the lens cap, pull the lens cap
cord in the direction of the arrow. 1
≥When you are not recording, be sure to cover
the lens with the lens cap for protection. 2
≥When you remove the lens cap, press the knobs
firmly.
The grip belt
Adjust the belt length so it fits your hand.
1Adjust the belt length.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
2
1
3
21
LSQT1174ENG.book 7 ページ ２００７年１月２９日　月曜日　午後１時２８分