Before using
11
LSQT1174
WARNING
THE LITHIUM BATTERY IN THIS UNIT MUST
ONLY BE REPLACED BY QUALIFIED
PERSONNEL. IF THIS IS NECESSARY,
CONTACT THE PANASONIC CUSTOMER
CARE CENTRE ON 132600 FOR YOUR
NEAREST AUTHORIZED SERVICE CENTR E.
Using the LCD monitor
You can record the image while viewing it on the
opened LCD monitor.
1Put a finger on the LCD monitor open part
and open the LCD monitor out in the
direction of the arrow.
It can open up to 90o.
2Adjust the angle of the LCD monitor as you
prefer.
It can rotate up to 180o 1 towards the lens or
90o 2 towards the viewfinder.
The brightness and colour level of the LCD
monitor can be adjusted from the menu.
If it is forcibly opened or rotated, the camera
may be damaged or fail.
If the LCD monitor is rotated by 180o towards
the lens and the viewfinder is extended (when
recording yourself), the LCD monitor and the
viewfinder simultaneously light.
Using the viewfinder
ªExtending the viewfinder
1Pull out the viewfinder. Extend it by
pinching the extension knob.
The viewfinder will be activated. (If the LCD
monitor is opened, the viewfinder will be
deactivated.)
ªAdjusting the field of view
1Adjust the focus by sliding the eyepiece
corrector knob.
You can adjust the brightness of the viewfinder
from the menu.

1180o 2 90o

12:30:4512:30:4512:30:45
1.4. 20071.4. 20071.4. 2007
12:30:45
1.4. 2007
LSQT1174ENG.book 11 ページ 2007年1月29日 月曜日 午後1時28分