Panasonic NV-GS60GN Auto focus function does not work, Remaining tape time indication disappears

LSQT1174ENG.book 41 ページ ２００７年１月２９日 月曜日 午後１時２８分

Others

4: Auto focus function does not work.

•Is manual focus mode selected? If auto focus mode is selected, focus is automatically adjusted.

•There are some recording subjects and surroundings for which the auto focus does not operate correctly. (-46-) If so, use the manual focus mode to adjust the focus. (-27-)

•Is the colour night view function set? When the colour night view function is working, focusing shifts into the manual mode.

Indications

1: A sentence is displayed in red in the screen centre.

•Read the contents and respond to them. (-38-)

2: The remaining tape time indication disappears.

•The remaining tape time indication may disappear temporarily during frame-by-frame playback or other operation. If you continue ordinary recording or playback, the indication is

restored.

3: The remaining tape time Indication does not match the actual remaining tape time.

•If scenes of less than 15 seconds are continuously recorded, the remaining tape time cannot be correctly displayed.

•In some cases, the remaining tape time indication may show remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time.

4: A function indication such as mode indication, remaining tape time indication, or time code indication is not shown.

•If you set [SETUP] >> [DISPLAY] >> [OFF], indications other than the tape running condition, warning, and date indications disappear.

Playback (Sound)

1: Sound is not played back from the built-in speaker of the movie camera.

0Is the volume too low? During playback, push the [jVOLUMEi] lever to display the volume indication and adjust it. (-29-)

2:Different sounds are reproduced at the same time.

•Have you set [SETUP] >> [AUDIO OUT] >> [STEREO] and reproduced a picture containing the main sound and sub sound? Set to [L] to hear main sound, and set to [R] to hear the sub

sound. (-37-)

3: Sounds cannot be played back.

•Have you set [SETUP] >> [12bit AUDIO] >> [ST2]? Set [12bit AUDIO] >> [ST1]. (-37-)

Playback (Pictures)

1: Mosaic-pattern noise appears on images during cue or review playback.

• This phenomenon is characteristic of digital video systems. It is not a malfunction.

2: Horizontal stripes appear on images during cue and review playback.

• Horizontal stripes may appear depending on the scene, but this is not a malfunction.

3:Although the movie camera is correctly connected to a TV, playback images cannot be seen.

•Have you selected video input on the TV? Please read the operating instructions of your

TV and select the channel that matches the input terminals used for the connection.

4: Playback picture is not clear.

•Are the heads of the movie camera dirty? If the heads are dirty, playback image cannot be clear. Clean the heads by using the head cleaner for digital video. (-43-)

•If the terminal for the AV cable is soiled, noises may appear on the screen. Wipe the soil off the terminal with a soft cloth, and then connect the cable to the AV terminal.

•Is a picture containing a copyright protection signal (copy guard) being recorded? When a protected picture is played back by the movie camera, mosaic-like patterns appear on the picture.

41

LSQT1174