4Adjust the recording paper guides. Pinch the front
side of the recording paper guide (D), then slide it to
match the paper size mark. Pinch the right side of the
recording paper guide (E), then slide it to adjust the
width to the size of the recording paper.
RMake sure that the recording paper is under the
paper limit mark (F), and the paper should not
be loaded over the snubbers (G).
G
D
E
F
5Insert the paper input tray into the unit, lifting the front
part of the tray. Then push it completely into the unit.
Note:
RIf the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
RIf the paper input tray does not close, the plate in the
paper input tray may not be in the locked position.
Push the paper down and make sure that the paper
is laying flat in the paper input tray.
Caution for the paper input tray
RDo not drop the paper input tray.
RHold the paper input tray with both hands when
removing or installing. The paper input tray
weighs approximately 2 kg (4.4 lb) when fully
loaded with recording paper.
Approx. 2 kg (4.4 lb)
1.7.1 Manual input tray
You can use the manual input tray for printing with the
computer and for copying. It can hold one page at a time.
When printing or copying multiple pages, add a next
page after the first page has been fed into the unit.
RPlease refer to page 97 for information on recording
paper.
RThe unit is set for printing letter-size plain paper
by default.
–To use other paper sizes, change the
recording paper size setting (feature #381 on
page 57).
–To use thin paper, change the recording paper
type setting (feature #384 on page 57).
1Adjust the width of the guides (A) to the size of the
recording paper.
For assistance, please visit http://www.panasonic.com/help 15
1. Introduction and Installation