Panasonic Basic operations by using the remote control, button, button, buttons, Switching the input signal, Using the SHUTTER/ AV MUTE button

Basic operations by using the remote control

Operation Basic

Using the SHUTTER/ AV MUTE button

*<SHUTTER> button (Only for EZ570 series, EW630 series and EX600 series)

This function allows you allows you to completely block out light to the screen.

button*Press the <SHUTTER> button on the remote control.

Note

zzFor details, see “Setting” of Main menu. (Æpage 69)

*<AV MUTE> button (Only for EW530 series and

EX500 series)

モヷチヮヶヵユ button*

Press the <AV MUTE> button on the remote control.

Press the < AV MUTE> button on the remote control to black out the image. To restore to normal, press the < AV MUTE> button again or press any button.

Note

zzWhen use the <MUTE> button to release the [AV mute] function, the mute function cannot be operated at the same time.

Switching the input signal

You can switch the input signals to project.

buttons

Press the <INPUT> button or the <INPUT 1>/<INPUT 2>/<INPUT 3> button on the remote control.

The input source changes each time you press the <INPUT> button as follows:

Input 1 --> Input 2 --> Input 3 --> ...

The input source changes each time you press the <INPUT 1>/<INPUT 2>/<INPUT 3> button as follows:

	INPUT 1 button		INPUT 2 button
		Input 1		Input 2
	RGB(PC analog)			Video
		RGB (Scart)		Y,Pb/Cb,Pr/Cr
		DVI-D		RGB
		DVI-D(HDCP)	INPUT 3 button
				Input 3
		HDMI
				Video
				Y,Pb/Cb,Pr/Cr
Note				S-video

zzWhether the input search function is available or not after you pressed the <INPUT> button, it depends on the setting of the [Input button] in the Setting menu. (Æpage 63)

black out projected image

42 - ENGLISH