Panasonic Red, Blue, Green, Offset, Color temp, Image adjust, Daylight View, 1111Press ▲▼ to select [Red], 1111Press ▲▼ to select [Blue]

Color temp.1111Press ▲▼ to select [Color temp.].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to select the desired Color temp. level.

zzYou can select the desired [Color temp.] from [XLow], [Low], [Mid] or [High].

Red1111Press ▲▼ to select [Red].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the setting value.

Operation	Adjustment	Adjustment
		range
Press ►.	deepen red tone	Maximum
		value 63
Press ◄.	lighten red tone	Minimum
		value 0

Green1111Press ▲▼ to select [Green].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the setting value.

Operation	Adjustment	Adjustment
		range
Press ►.	deepen green	Maximum
	tone	value 63
Press ◄.	lighten green	Minimum
	tone	value 0

Image adjustBlue1111Press ▲▼ to select [Blue].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the setting value.

Operation	Adjustment	Adjustment
		range
Press ►.	deepen blue tone	Maximum
		value 63
Press ◄.	lighten blue tone	Minimum
		value 0

Offset1111Press ▲▼ to select [Offset].

2222Press ► or the <ENTER> button to access the submenu.

3333Press ▲▼ to select the desired item and then press the <ENTER> button.4444Press ◄► to adjust the setting value.

Operation	Adjustment	Adjustment
		range
	deepen red/green/
Press ►.	blue tone of the	Maximum
	black level of an	value 63
	image
	lighten red/green/		Settings
Press ◄.	blue tone of the	Minimum
	black level of an	value 0
	image

Daylight View

This function uses an ambient light sensor to detect the room’s light intensity and adjust the projector output automatically to ensure a bright presentation.

1111Press ▲▼ to select [Daylight View].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to switch between [Auto], [On] and [Off].

Note

zzWhen [Rear] is set to [On], [Auto] is disabled. zzWhen this function is set to [On] or [Auto], the

[Sharpness] is disabled.

ENGLISH - 57