JJExecute

1111Press ▲▼ to select one among the items as below and then press the <ENTER> button.

Start It executes the count up or count down function.*1

Reset Reset the P-timer values.*2

Exit To exit the P-timer operation.

*****Press the <ENTER> button at Start and the indication changes into Stop. To stop Count up or Count down, press the <ENTER> button at Stop on the screen menu, then the indication changes into Restart. Press the <ENTER> button at Restart to resume Count up or Count down.

*****Press the <ENTER> button at Reset to return to the following value:

Count up

"000:00"

Count down

Timer that you set

Attention

zzTo stop the [P-timer] function, press the <P-TIMER> button.

zzTo cancel the [P-timer], press and hold the <P-TIMER> button for a few seconds.

Security

This function allows you to use the [Key lock] and [PIN code lock] function to set the security for the projector operation.

1111Press ▲▼ to select [Security].

2222Press ► or the <ENTER> button to access the submenu.

JJKey lock

This function locks the side control and remote control buttons to prevent operation by unauthorized persons.

1111Press ▲▼ to select the desired items as below.

Unlocked.

Lock the operation of the side control. To unlock, use the remote control.

Lock the operation of the remote control. To unlock, use the side control.

Setting

JJPIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

1111Press ▲▼ to select the desired items as below.

Off

Unlocked.

 

 

On 1

Enter the PIN code every time

turning on the projector.

 

 

 

 

Enter the PIN code to operate

 

the projector once the power cord

On 2

is disconnected; as long as the

AC power cord is connected, the

 

 

projector can be operated without

 

a PIN code.

Attention

zzWhenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The "1234" is set as the initial PIN

code at the factory.

JJPIN code change

The PIN code can be changed to your desired four- digit number.

1111Press ▲▼ to select [PIN code change] and then press <ENTER> button.

zzCurrent Pin code dialog box appears.

2222Press ▲▼ to enter the current code. Press ► button to fix the number and move the red frame pointer to the next box.

zzThe New PIN code input dialog box appears.

3333Repeat these steps to set a new PIN code.Shutter

Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.

1111Press ▲▼ to select [Shutter*].

2222Press ► or the <ENTER> button to access the submenu.

*(Only for EZ570 series, EW630 series and EX600 series.)

JJProtection

Prohibit the shutter operation from the remote control and the projector's side control.

Settings

ENGLISH - 69