Panasonic Network, Network setup, Projector name, Network control, 2222Press the <ENTER> button, 1111Press ▲▼ to select [Projector name]

Network

Select [Network] from the Main Menu (see “Navigating through the menu” on page 47), then select the item from the sub-menu.

Remote Control Side Control

Projector name

You can change the projector name to be displayed on the network.

1111Press ▲▼ to select [Projector name].

2222Press the <ENTER> button.

3333Press ▲▼◄► buttons to set the [Projector name].

Default gateway	Enter the gateway address if DHCP
(Display of gateway
	server is not used.
address and setting)
DNS1
(Display of Preferred	Enter the DNS server address if
DNS server address	DHCP server is not used.
and setting)
DNS2
(Display of Alternate	Enter the alternate DNS server
DNS server address	address if DHCP server is not used.
and setting)

3333Press ▲▼◄► to select [Set], and press <ENTER> button.

zzDefault wired LAN settings

The following settings are set before the projector leaves the factory.

DHCP	Off
IP address	192.168.10.100
Subnet mask	255.255.255.0
Default gateway	192.168.10.1
DNS 1/DNS 2	NONE

Note

zzBefore using the DHCP server, make sure the DHCP server is already functioning.

zzFor details of IP address, subnet mask, gateway and DNS, ask the network administrator.

Network setup

You can make detailed wired LAN settings.

1111Press ▲▼ to select [Network setup], and press <ENTER> button.

2222Press ▲▼ to select an item, and change the setting according to the instructions.

	On: If a DHCP server exists in the
	network to which the projector
	is connected, the IP address
DHCP	will automatically be acquired.
	Off: If a DHCP server does not
(DHCP client function)	exist in the network to which
	the projector is connected,
	additionally set [IP address,
	[Subnet mask] and [ Default
	gateway].
IP address	Enter the IP address if DHCP
(Display of IP address
and setting)	server is not used.
Subnet mask	If not using a DHCP server,
(Displaying and
setting the subnet	enter the subnet mask
mask)

Network control

Set when you want to control the projector from a computer connected to the network.

1111Press ▲▼ to select [Network control].

2222Press ► or the <ENTER> button to access the submenu items.

3333Press ▲▼ to select one item and press ◄► to switch the function between [On] and [Off].

WEB control	Set to [On] to control with the Web
	browser.
PJLink control	Set to [On] to control with the
	PJLink protocol.
Command	Set to [On] to control with the
	SERIAL IN terminal control
control
	command format.
AMX D. D.	Set to [On] to control with the
	AMX Device Discovery.
RoomView	Set to [On] to control with the
	Crestron RoomView®.

Settings

ENGLISH - 73