Panasonic Gamma, Reset, Store, Settings, Sharpness, Progressive, Image adjust, Noise reduction, 2222 Press the <ENTER> button, 1111Press ▲▼ to select [Gamma]

Settings

Image adjust

Sharpness1111Press ▲▼ to select [Sharpness].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the setting value.

Operation	Adjustment	Adjustment
		range
	increase the	Maximum
Press ►.	sharpness of the
		value 31
	image
	decrease the	Minimum
Press ◄.	sharpness of the
		value 0
	image

Gamma1111Press ▲▼ to select [Gamma].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the gamma value to obtain a better balance of contrast.

zzAdjustments can be made between 0 and 15.

Noise reduction1111Press ▲▼ to select [Noise reduction].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to select the desired item.

Off Disabled

On The function works

zzNoise interference on the screen can be reduced. Select one of the above options to get smoother images.

zz[Noise reduction] cannot be selected when [1 080p] is selected.

Note

zzWhen input video signal to the projector, [Noise reduction] will become available.

Progressive1111 Press ▲▼ to select [Progressive].2222 Press the <ENTER> button to display the dialog box.3333 Press ◄► to select the desired item.

zzAn interlaced video signal can be displayed in progressive mode. Select one of the following options.

zz[Progressive] cannot be selected when [480p], [576p], [720p] or [1 080p] is selected.

Off Disabled

On The function works

Film For watching a film

Note

zzWhen input video signal to the projector, [Progressive] will become available.

Reset

To reset the adjusted data, all adjustments will return to their previous figures.

1111 Press ▲▼ to select [Reset].

2222 Press the <ENTER> button.

zzA confirmation box appears and then select [Yes].

Note

zzTo reset the adjusted data except [Daylight View].

Store

1111 Press ▲▼ to select [Store].

2222 Press ► or the <ENTER> button.3333 Press ▲▼ to select one from Image 1 to 10 and press the <ENTER> button.

zzA confirmation box appears and then select [Yes].

Note

zzTo store the adjusted data except [Daylight View].

zzMake sure you selected [Store] after adjusting settings. Some settings can not be stored if not registered with [Store] function.

58 - ENGLISH