Setting
Select [Setting] from the Main Menu (see “Navigating through the menu” on page 47), then select the item from the
Remote Control | Side Control |
For example:
zzThe language used in the
[Menu] function is only for EZ570 series.
[Menu position] function is only for EW630 series, EW530 series, EX600 series and EX500 series.
This function is used to change the position of the On- Screen Menu.
1111Press ▲▼ to select [Position].2222Press the <ENTER> button to change the position.zzThe Position changes each time you press <ENTER> button as follows:
the center → the bottom left → the bottom right → the top left → the top right → the center.......
JJMenu size*1This function is used to change the display size of the
Normal Display the
Double Display the
***** This function is only for EZ570 series.
Input buttonThis function detects the input signal automatically. When a signal is found, the search will stop.
1111Press ▲▼ to select [Input button].2222Press the <ENTER> button.3333Press ▲▼ to select these functions as follows:Mode 1 Input search will not work*1
Mode 2 Input search works*2
Mode 3 Input search works*3
*****Input search will not work.
*****Input search works under the following situation:
●When pressing the <INPUT> button on the remote control or on the side control.
*****Input search works under the following situation:
●When turning on the projector by pressing the
<POWER ON> button on the remote control
or the< |
|
| > button on the side control.●●●●● |
|
● When pressing the <INPUT> button on the remote control or the side control.
● When no signal is detected.
Settings
ENGLISH - 63