Maintenance

Replacement

Before replacing the unit

zzWhen you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect the power plug from the wall outlet. (Æpages 36, 40)

zzBe sure to observe the procedure “Turing off the projector” (Æpage 40) when performing power supply operation.

Maintenance

JJOuter Case

Wipe off dirt and dust using a soft dry cloth.

zzIf the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with a dry cloth.

zzDo not use benzene, thinner, or rubbing alcohol, other solvents, household cleaners. Using them may cause deterioration of the outer case.

zzWhen using chemical treated dusters, follow its instruction.

JJFront glass surface of the lens

Wipe off the dirt and dust off the front surface of the lens with soft clean cloth.

zzDo not use a cloth that has an abrasive surface or a cloth that is moist, oily, or covered with dust. zzDo not use excessive force when wiping the lens as it is fragile.

Attention

zzThe lens is made of glass. Impacts or excessive force when wiping may scratch its surface. Please handle with care.

Replacing the unitJJAir filter unit

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector.

If <FILTER> indicator lights orange, replace the filter immediately.

JJReplacement of the air filter unit

Filter cover

 

1111Turn off the projector, and unplug the

 

AC power cord from the AC outlet.

 

2222First, clean up the dust on the

Latch

projector and around the air vents.

 

3333Press ▼ downwards on the filter cover to release the latch and open the filter cover.

94 - ENGLISH