Adjusting the picture
Colour Hue Setting (color temperature)
Noise Reduction (NR)
(When
Select the item pressing the F or G buttons on the remote control unit or the projector.
Press the I or H buttons to set the selective items. For the value adjusting items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting.
When an
PICTURE
PICTURE MODE | STANDARD |
COLOR TEMP. | STANDARD |
COLOR | 32 |
TINT | 32 |
BRIGHT | 32 |
CONTRAST | 32 |
SHARPNESS | 2 |
NR | 1 |
AUTO1 | |
STANDARD |
|
STANDARD
HIGH
LOW
This is used to adjust the white areas of the picture if they appear bluish or reddish.
COLOR
signals are being input)
If the signal is of such poor quality that picture interference appears, you can suppress this interference by adjusting the NR (Noise Reduction), except for 750p (720p), HDTV60 (1080i/60) and HDTV50 (1080i/50) signals. To strengthen the effect, press the H button. To turn it off , set to “0” by pressing the I button.
When an RGB/DVI signal is being input
PICTURE
PICTURE MODE | STANDARD |
COLOR TEMP. | STANDARD |
BRIGHT | 32 |
CONTRAST | 32 |
SHARPNESS | 6 |
WHITE BALANCE R | 32 |
WHITE BALANCE G | 32 |
WHITE BALANCE B | 32 |
STANDARD |
|
SELECT:[^][@] | ENTER:[ENTER] |
ADJUST:[{][}] | ESC:[MENU] |
SELECT:[^][@] ENTER:[ENTER]
ADJUST:[{][}] ESC:[MENU]
When the NETWORK/SD CARD is selected
PICTURE
PICTURE MODE | STANDARD |
COLOR TEMP. | STANDARD |
BRIGHT | 32 |
CONTRAST | 32 |
STANDARD |
|
Press the H button to make the colour more vivid in tone, and press the I button to make the colour more pastel in tone.
TINT
(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish.
BRIGHT
TV SYSTEM
AUTO1
AUTO2
NTSC
NTSC4.43
PAL
Basic Operation
When a YPBPR signal is being input
PICTURE
PICTURE MODE | STANDARD |
COLOR TEMP. | STANDARD |
COLOR | 32 |
TINT | 32 |
BRIGHT | 32 |
CONTRAST | 32 |
SHARPNESS | 2 |
NR | 1 |
STANDARD |
|
SELECT:[^][@] | ENTER:[ENTER] |
ADJUST:[{][}] | ESC:[MENU] |
SELECT:[^][@] ENTER:[ENTER]
ADJUST:[{][}] ESC:[MENU]
PICTURE MODE
STANDARD
DYNAMIC
NATURAL
Select the picture mode that best matches the image source and room conditions.
The mode best used in dark rooms is NATURAL. For rooms having regular lighting conditions in use, select STANDARD. For exceptionally bright rooms, use
DYNAMIC.
This adjusts the darker areas (black areas) in the picture. Press the H button if dark areas are too solid (for example, if hair is difficult to see), and press the I button if black areas are too light (grey rather than black).
CONTRAST
This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the
Ibutton to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.)
SHARPNESS
Press the H button to make the picture details sharper, and press the I button to make the picture details softer.
SECAM
AUTO1 The projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/SECAM signals.
AUTO2 The projector automatically distinguishes between NTSC/PAL-
NOTE:
BThis should normally be set to “AUTO1” or “AUTO2”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.
