Returning a setting to the factory default
Using the D.ZOOM (digital zoom)
Select the STANDARD from the menu screen by pressing the F or
Gbuttons and then press the
ENTER button to return all items displayed on the screen to their factory default settings.
BWhen a menu screen is being displayed
POSITION
POSITION | H: | 128 | V: | 32 |
DOT CLOCK | 32 |
|
|
|
CLOCK PHASE | 16 |
|
|
|
KEYSTONE | H: | 0 | V: | 0 |
OSD POSITION |
| TOP LEFT |
| |
RESIZING |
| OFF | ON |
|
AUTO SETUP |
|
|
|
|
FRAME LOCK |
| OFF | ON |
|
|
|
|
|
|
STANDARD |
|
|
|
|
SELECT:[^][@] |
| ENTER:[ENTER] |
| |
ADJUST:[{][}] |
| ESC:[MENU] |
| |
Using the freeze function
The picture will alternate between a still picture and a moving picture each time the FREEZE button on the remote control unit is pressed.
Still picture |
|
|
| Moving picture |
|
|
| ||
|
|
|
|
|
function
This function lets you enlarge the picture.
#Press a D.ZOOM +/- button
[
The picture will then be enlarged to 1.5 times the normal size.
$Use the F, G, I and H buttons to move the enlarged area which you want to project.
%Use the D.ZOOM +/- buttons to change the enlargement ratio. The enlargement ratio can be changed within the range of x1 to x4, by 30 steps.
&Press the MENU button to return to the normal screen.
NOTE:
BThis function can only be used when using the remote control unit.
BIf the type of signal being input changes while the digital zoom function is being used, the digital zoom function will be cancelled.
Basic Operation
