Lens adjustment
Select an item by pressing the F or G buttons on the remote control unit or the projector.
Projection lens replacement
By replacing the projection lens with a lens that is sold separately, you can change the projection distance.
LENS
ZOOM/FOCUS | � |
LENS SELECT | STANDARD |
SELECT:[^][@] ENTER:[ENTER]実行：［ＥＮＴＥＲ］� ESC:[MENU]
Zoom/Focus adjustment
Press the ENTER button to display the individual adjustment screen.
LENS SELECT
Change the setting in accordance with the type of projection lens (sold separately) by pressing the I or H buttons.
STANDARD
For standard projection
LONG FOCUS
For
MIDDLE FOCUS
For
SHORT FOCUS
For
Removing the lens
#Turn the projection lens anticlockwise until it is in position.
$While pressing the lens release button, turn the projection lens anticlockwise again.
%Remove the projection lens.
Installing the lens
#Insert the other projection lens (sold separately) as far as it will go, while matching the projection to the groove.
←→ZOOM� ↑↓FOCUS�
Press the I or H buttons to adjust the projected image size.
Press the F or G buttons to adjust the projected image focus.
Signal connection |
|
|
| Projection |
|
|
| Groove | |
$Turn the projection lens clockwise until a click is heard.
Operation
The projected image focus or zoom can also be adjusted by pressing the FOCUS +/- or ZOOM +/- buttons on the projector. To make fine adjustments to the projected image focus, use the FOCUS +/- buttons.
NOTE:
BWhen replacing a projection lens, make sure that the power is off (the Power indicator illuminates green).
BDo not touch the signal connection. If any dust or lint gets onto the signal connection, the electrical contact may become poor.
BDo not touch the surface of the lens with your bare hands.
BStore the replaced projection lens away carefully to avoid subjecting it to excessive vibration or shock.
Advanced
