![](/images/new-backgrounds/1157749/15774917x1.webp)
<Connector panel>
# $ % & ' ( )
RGB signals and YPBPR signals.
(pages 24 and 25) |
Only one system is provided, so |
connect the appropriate |
RGB2 or RGB3.
.VIDEO IN jack |
(page 24) |
This jack is used to input video |
signals from a video equipment |
USBSERIAL
S-VIDEO
L
RGB1 IN | AUDIO OUT | |
RGB2 IN/RGB OUT |
| |
|
| R |
*
connector when using RGB1, |
such as a video deck. |
REMOTE
+
|
|
| RGB AUDIO IN VIDEO IN | AUDIO IN |
G/Y | VD |
| ||
|
| RGB3 IN |
|
|
,
(PT-L780NTE only)
<Card slot> | <SD memory card> |
# |
|
Preparation
#USB port (page 19)
The remote control unit can be used as a personal computer mouse by connecting the projector to a personal computer with the supplied USB cable.
(pages 24 and 25)
This jack is used to output the audio signals which are input to the projector. If audio equipment is connected to this jack, no sound will be output from the
| Front | Back |
|
| ( |
$ |
| LOCK |
|
| ) |
% ' | & |
|
$SERIAL connector (pages 24, 25 and 56)
This connector is used to connect a personal computer to the projector in order to externally control the projector.
%RGB1 IN connector (pages 24 and 25)
This connector is used to input RGB signals and YPBPR signals.
&RGB2 IN/RGB OUT connector (pages 24 and 25)
This connector is used to input or output RGB signals and YPBPR signals. Use the RGB2 SELECT item in the OPTION menu to select whether you want input or output with this connector.
'
This connector is used to input
(AUDIO OUT jack
(pages 24 and 42) |
This connector is used to input |
signals from a |
compatible equipment such as a |
video deck. The connector is S1 |
signal compatible, and it |
automatically switches between |
16:9 and 4:3 aspect ratios in |
accordance with the type of |
signal being input. |
*AUDIO IN L-R (for VIDEO/S- VIDEO) jacks
(page 24)
Only one system is provided, so connect the appropriate connector when using VIDEO or
+Remote control connector (page 55)
This connector is used to control the projector from the Remote Control set up in Wired mode.
,RGB3 (YPBPR) IN connector (pages 24 and 25)
This connector is used to input
#Slot cover
Covers the card slots. When using an optional projector LAN card, replace the slot cover (refer to page 52).
$Card slot
Insert an optional wireless card or a projector LAN card into here.
%Eject switch
Use to remove an optional wireless card or projector LAN card from the card slot.
&Access lamp
Flashes while the projector is being accessed for reading or writing the data in the SD memory card.
'SD memory card slot
Insert the SD memory card into here.
(Metal terminals These terminals are for connecting the SD memory card to the projector’s card slot. Do not touch the metal terminals with hands or metal objects, attach stickers to them, or allow them to become contaminated in any way.
)
If the