Panasonic PT-L780NTE Adjusting the position, White Balance R/G/B, Then use the I or H button to

WHITE BALANCE R/G/B

(RGB only)

Adjusting the position

This is used to adjust the white areas of the picture if they appear colourised. Press the I button to make the selected colour lighter. Press the H button to make the selected colour stronger.

Projecting sRGB- compatible pictures

sRGB is an international colour reproduction standard (IEC61966-2-

1)established by the International Electrotechnical Commission (IEC). If you would like the colours in sRGB-compatible pictures to be reproduced more faithfully, make the following settings.

#Press the F or G button to select “PICTURE MODE”, and then use the I or H button to select “NATURAL”.

$Press the F or G button to

select “COLOR TEMP.”, and

When the input signal is RGB, first press the AUTO SETUP button to initiate automatic positioning.

If the optimum setting is not obtained when AUTO SETUP is carried out, adjust by the following procedure.

Select the item pressing the F or G buttons on the remote control unit or the projector.

Press the I or H buttons, to adjust the alternative items. For the numerically adjustable items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting. Some items can be adjusted pressing the F or G buttons.

When an RGB/DVI signal is being input

When an S-VIDEO/VIDEO signal is being input

POSITION

POSITION	H:	32	V:	16
KEYSTONE	H:	0	V:	0
OSD POSITION		TOP LEFT
ASPECT		AUTO
RESIZING		OFF	ON
AUTO SETUP
STANDARD

	SELECT:[^][@]		ENTER:[ENTER]				Operation
	ADJUST:[{][}]		ESC:[MENU]
When a YPBPR signal is being input.
							Basic
	POSITION
	POSITION	H:	32		V:	32
	KEYSTONE	H:	0		V:	0
	OSD POSITION		TOP LEFT
	ASPECT			4:3
	RESIZING		OFF		ON
	AUTO SETUP
	STANDARD

then use the I or H button to

select “STANDARD”.

%Select the STANDARD from the menu screen by pressing the F or G buttons and then press the ENTER button.

&Select the LAMP POWER item in the OPTION menu by pressing the F or G buttons and set to “HIGH” by pressing the I or H buttons. (pages 44 and 45)

NOTE:

BsRGB is only enabled when RGB signals are being input .

POSITION

POSITION	H:	128	V:	32
DOT CLOCK	32
CLOCK PHASE	16
KEYSTONE	H:	0	V:	0
OSD POSITION		TOP LEFT
RESIZING		OFF	ON
AUTO SETUP
FRAME LOCK		OFF	ON
STANDARD
SELECT:[^][@]		ENTER:[ENTER]
ADJUST:[{][}]		ESC:[MENU]

“POSITION”, “DOT CLOCK” and

“CLOCK PHASE” are not displayed when a DVI signal is being input.

SELECT:[^][@] ENTER:[ENTER]

ADJUST:[{][}] ESC:[MENU]

When the NETWORK/SD CARD is selected (PT-L780NTE only)

POSITION

KEYSTONE	H:	0	V:	0
OSD POSITION		TOP LEFT
AUTO SETUP
STANDARD

SELECT:[^][@] ENTER:[ENTER]

ADJUST:[{][}] ESC:[MENU]

38-ENGLISH ENGLISH-39