NOTE:
BS1 video signals |
S1 video signals are a type of video |
signal with an aspect ratio of 16:9 |
which include a detector signal. This |
detector signal is output by some |
sources such as |
decks. If the AUTO setting above is |
selected, this projector will recognise |
the detector signal and automatically |
switch the aspect ratio to 16:9 in |
order to project the picture. |
BThis projector is equipped with an |
aspect ratio selection function. |
However, if a mode which does |
not match the aspect ratio of the |
input signal is selected, it may |
affect the quality of viewing of the |
original picture. Keep this in mind |
BWhen a VGA60 or 525p RGB signal is being input, select the signal in accordance with the input signal.
RESIZING
This should normally be set to “ON”. (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 61 for details.)
ON
The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. For signals with lower resolutions, gaps in the pixels are automatically interpolated into the picture before it is projected.
Audio adjustment
Select the items by pressing the F or G buttons on the remote control unit or the projector.
AUDIO
VOLUME | 20 |
|
MUTE | OFF | ON |
SELECT:[^][@] ENTER:[ENTER]
ADJUST:[{][}] ESC:[MENU]
VOLUME
Press the I or H buttons to adjust the volume of the sound output by the projector’s
MUTE
Set the MUTE to “ON” pressing the
Ior H buttons to turn off the volume of the sound output. To release muting, set to “OFF” pressing the I or H buttons.
Operation
when selecting the aspect ratio. |
BIf using this projector in places |
such as cafes or hotels with the |
aim of displaying programmes for |
viewing for a commercial purpose |
or for public presentation, note |
that if the aspect ratio (16:9) |
selection function is used to |
change the aspect ratio of the |
screen picture, you may be |
infringing the rights of the original |
copyright owner for that |
programme under copyright |
protection laws. |
BIf a normal (4:3) picture which |
was not originally intended for |
onto a wide screen, distortion |
may occur around the edges of |
the picture so that part of the |
picture is no longer visible. Such |
programmes should be viewed in |
4:3 mode to give proper |
consideration to the aims and |
intentions of the original |
programme’s creator. |
This may sometimes cause problems with the quality of the picture.
OFF
The picture signal is projected at its original resolution, with no pixel conversion. The projected picture will be smaller than normal, so adjust the zoom setting or move the projector forwards or backwards to adjust the picture size if necessary. If set to “OFF”, some features, such as D.ZOOM (digital zoom) or keystone distortion correction will not function.
AUTO SETUP
This item functions in the same way as the AUTO SETUP button on the remote control unit. (page 14)
FRAME LOCK
If the picture’s condition is bad while a RGB moving picture signal is projected, set the FRAME LOCK to “ON”. Refer to page 61 on compatible RGB signals.
Changing the display language
Use the F and G buttons on the projector or remote control unit to select a language, then press the MENU button to accept the setting.
LANGUAGE
ENGLISHITALIANO
DEUTSCH
FRANÇAIS
ESPAÑOL
SELECT:[^][@][{][}] ENTER:[ENTER]
ADJUST:[{][}]ESC:[MENU]
Basic
