Connections
Notes on connections
BRead the instruction manual for each system component carefully before connecting it.
BTurn off the power supply for all components before making any connections.
BIf the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.
BIf there is a lot of jitter in the video signal which is input from the video source, the picture on the screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).
BThe projector has
BIt may not be possible to connect some types of computer. Refer to the list of compatible signals on page 61.
BThe pin layout and signal names for the
BThe pin assignments on the
:3
2
+
* #
View from mating side
Pin No. | Signal | Pin No. | Signal |
# | T.M.D.S data 2- | / | T.M.D.S data 3+ |
|
|
| |
$ T T.M.D.S data 2+ | 0 | +5 V | |
|
|
| |
% T.M.D.S data 2/4 shield | 1 | Ground | |
|
|
|
|
& | T.M.D.S data 4- | 2 | Hot plug sense |
|
|
|
|
' | T.M.D.S data 4+ | 3 | T.M.D.S data 0- |
|
|
|
|
( | DDC clock | 4 | T.M.D.S data 0+ |
|
|
|
|
) | DDC data | 5 | T.M.D.S data 0/5 shield |
|
|
|
|
* | - | 6 | T.M.D.S data 5- |
Preparation
#$
&%
External view
Pin No. | Signal |
#Earth (Luminance signal) $ Earth (Colour signal)
% Luminance signal & Colour signal
+ | T.M.D.S data 1- | 7 | T.M.D.S data 5+ |
, | T.M.D.S data 1+ | 8 | T.M.D.S clock shield |
|
|
|
|
- | T.M.D.S data1/3 shield | 9 | T.M.D.S clock+ |
|
|
|
|
. | T.M.D.S data 3- | : | T.M.D.S clock- |
BThe pin layout and signal names for the RGB/YPBPR (RGB1 IN/RGB2 IN) connector are shown below.
-1
(,
#'
External view
Pin No. | Signal |
# | R/PR |
|
|
$ | G/G·SYNC/Y |
|
|
% | B/PB |
|
|
. | SDA |
|
|
/ | HD/SYNC |
|
|
0 | VD |
|
|
1 | SCL |
|
|
Pin + is spare.
Pins
Pins . and 1 functions are only valid when supported by the computer
