About Your Projector
Preparation
ENGLISH - 13
Back and bottom view
J
Lamp unit compartment
(Æpage 49)
Terminals
AC IN
Connect the power cord
to supply electronic
power to the projector.
(Æpage 19)
Security lock
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector. Compatible
with the Kensington MicroSaver Security System.
Air lter compartment
(Æpage 47)
Front leg adjusters and leg
adjuster buttons
Adjust the projection angle.
(Æpage 16, 23)
Remote control
signal receptor
Burglar hook port
Attach a commercial
burglar prevention
cable.
Air intake port
Speaker
Air outlet port
Heated air comes out
of this opening.
Front leg adjusters and
leg adjuster buttons
Adjust the projection
angle.
(Æpage 16, 23)
Terminals
J
VARIABLE AUDIO OUT
Connect an audio cable for
outputting audio signals to
the connected equipment.
(Æpage 17, 18)
COMPUTER1 IN
COMPUTER2 IN
Connect a computer or
YPBPR signal cable.
(Æpage 18)
S-VIDEO/VIDEO IN
Connect a S-VIDEO signal cable or
an RCA composite video cable.
(Æpage 17)
AUDIO IN
Connect audio cables for inputting
audio signal corresponding to
VIDEO IN, S-VIDEO IN.
(Æpage 17)
COMPUTER AUDIO IN
Connect audio cables
for inputting audio sig-
nals corresponding to
COMPUTER1 IN and/or
COMPUTER2 IN.
(Æpage 18)
LAN
Connect a network
cable.
(PT-LB90NTU only)
(Æpage 54)
SERIAL
Connect a computer
to control the projector
operation.
(Æpage 18, 53)
Note
Do not place your hands or other objects close to the air outlet port as this may cause damage or injury.
z
Heated air comes out of the air outlet port. Do not place your hands or face, or objects which cannot withstand
z
heat close to this port.