Read this rst

Preparation
ENGLISH - 11
Read this rst
When you start the projection for the rst time or after the projector is initialised (Æpage 42), the LANGUAGE
menu and the INITIAL SETTING menu will be displayed.
Set those menus according to the usage conditions and environment.
The setting can be changed by navigating through the ON SCREEN MENU.

LANGUAGE

J
Select the required language setting. (Æpage 35)
Press ▲▼◄►buttons of the remote
1 )
control or control panel on the projector
to highlight the required language.
PLEASE SELECT LANGUAGE
SELECT
ENTER
Press the ENTER button to proceed to 2 )
the next INITIAL SETTING menu.
JINITIAL SETTING
Select the required setting of INSTALLATION and
HIGH ALTITUDE MODE.
Press ▲▼buttons to select the required
1 )
menu.
Press ◄►buttons to change the settings
2 )
of INSTALLATION or HIGH ALTITUDE
MODE.
RETURN
SELECT
ENTER
INSTALLATION
INITIAL SETTING
FRONT/DESK
HIGH ALTITUDE MODE
SWITCH TO HIGH ALTITUDE MODE “ON” IF OVER 1400m(4593Ft).
OFF
INSTALLATION
z(Æpage 16, 39)
FRONT/
DESK
Setting on a desk/oor and
projecting from front
FRONT/
CEILING
Mounting in the ceiling with a ceiling
mount bracket (sold separately) and
projecting from front
REAR/
DESK
Setting on a desk/oor and
projecting from rear (Translucent
screen is required)
REAR/
CEILING
Mounting in the ceiling with a ceiling
mount bracket (sold separately) and
projecting from rear (Translucent
screen is required)
HIGH ALTITUDE MODE (
zÆpage 8, 39)
OFF For use in normal environment
ON For use at high altitude (above
1 400 m (4 593 ft))
Press the ENTER button to nish.3 )
Remarks
To return to the
zLANGUAGE menu, press the
RETURN button in the INITIAL SETTING menu.