Switching the projector on/off
Basic Operation
20 - ENGLISH
POWER and POWER LOCK indicators
The POWER indicator informs you of the status of the power and the POWER LOCK indicator shows the status
of the RELEASE button. When the TEMP indicators are ashing, the POWER and POWER LOCK indicators will
light red and you cannot switch the projector on.
POWER indicator
POWER LOCK indicator

JPOWER LOCK indicator status

Indicator status Status
No illumination or ashing
No power is supplied.
z
The
zRELEASE button is pressed and the POWER button is unlocked while
the power is on.
Red Lit The POWER button is locked.
Flashing Pressing the locked POWER button.

JPOWER indicator status

Indicator status Status
No illumination or ashing No power is supplied and the internal cooling fan is not operating.
Red Lit The power is turned off (when STANDBY MODE is set to ECO).
If the POWER button is pressed, projection starts.
Flashing The power is turned off (when STANDBY MODE is set to NORMAL).
Green Flashing The power is on and preparing for projection.
Lit The projector is projecting.
Orange
Lit No power supply and the internal fan is cooling the lamp by internal power
supply.
Flashing The power is switched on again while cooling the lamp and recovering to the
projection mode. Recovery may take a while.
Remarks
When the power is turned off, the internal fan is cooling the lamp by internal power supply.
z
The power is switched on again while cooling the lamp and recovering to the projection mode. Recovery may
z
take a while.
Even while the power is turned off (when
zSTANDBY MODE is set to ECO, the POWER indicator is lit in red),
power of about 0.9 W is consumed.