Setting up

Getting Started
ENGLISH - 15
Setting up

Screen size and throw distance

You can adjust the projection size with 1.2× zoom lens. Calculate and dene the throw distance as follows.
SD
SW
SH
L (LW/LT)
SH
88,6 mm
L (LW/LT)
SW
Projected image
Screen
Screen
(All measurements below are approximate and may differ slightly from the actual measurements.)
Projection size For 4:3 aspect ratio For 16:9 aspect ratio
Screen diagonal (SD) Minimum distance
(LW)
Maximum distance
(LT)
Minimum distance
(LW)
Maximum distance
(LT)
0.84 m (33") 1.1 m (3' 7") 1.2 m (3' 11")
1.02 m (40") 1.1 m (3' 7") 1.4 m (4' 7") 1.3 m (4' 3") 1.5 m (4' 11")
1.27 m (50") 1.4 m (4' 7") 1.7 m (5' 6") 1.6 m (5' 3") 1.9 m (6' 2")
1.52 m (60") 1.7 m (5' 6") 2.1 m (6' 10") 1.9 m (6' 2") 2.3 m (7' 6")
1.78 m (70") 2.0 m (6' 6") 2.4 m (7' 10") 2.2 m (7' 2") 2.6 m (8' 6")
2.03 m (80") 2.3 m (7' 6") 2.8 m (9' 2") 2.5 m (8' 2") 3.0 m (9' 10")
2.29 m (90") 2.6 m (8' 6") 3.1 m (10' 2") 2.8 m (9' 2") 3.4 m (11' 1")
2.54 m (100") 2.9 m (9' 6") 3.5 m (11' 5") 3.2 m (10' 6") 3.8 m (12' 5")
3.05 m (120") 3.5 m (11' 5") 4.2 m (13' 9") 3.8 m (12' 5") 4.6 m (15' 1")
3.81 m (150") 4.3 m (14' 1") 5.2 m (17' 0") 4.7 m (15' 5") 5.7 m (18' 8")
5.08 m (200") 5.8 m (19' 0") 7.0 m (22' 11") 6.3 m (20' 8") 7.6 m (24' 11")
6.35 m (250") 7.3 m (23' 11") 8.7 m (28' 6") 7.9 m (25' 11") 9.5 m (31' 2")
7.62 m (300") 8.7 m (28' 6") 10.5 m (34' 5") 9.5 m (31' 2") 11.4 m (37' 4")
You can calculate more detailed screen dimensions from the screen diagonal.
The results below are approximate and may differ slightly from the actual measurements.
If the projection size is SD,
For 4:3 aspect ratio For 16:9 aspect ratio
Screen height (SH) = SD (m) × 0.0152 = SD (m) × 0.0125
Screen width (SW) = SD (m) × 0.0203 = SD (m) × 0.0221
Minimum distance (LW) = 0.0292 × SD (m)
-
0.036 = 0.0318 × SD (m)
-
0.022
Maximum distance (LT) = 0.0351 × SD (m)
-
0.044 = 0.0383 × SD (m)
-
0.046
Note
zFor the best quality of the projection image, install a screen where sunlight or room light does not shine directly
onto the screen. Close window shades or curtains to block the light and turn off the lamps.
Do not use the projector at a raised or a horizontally tilted position. Doing so may cause malfunction of the
z
projector.
You can tilt the projector body approximately ±30 ° vertically and ±10 °
horizontally.
Overtilting may result in shortening the component’s life.
Do not cover the air outlet port and air intake ports or place anything within
z
50 cm (20") of them as this may cause damage or injury.
+30 °
-
30 °