Panasonic PV-L453 Using Menu Mode, Camera Mode Menu Screen VCR Mode Menu Screen

1, 2, 3, 4

Using MENU Mode

Before you begin...

•Connect Camcorder to power source.

•Set POWER to CAMERA or VCR.

1Press MENU for MENU mode.

The CAMERA or VCR MENU screen (see below left) appears when Menu mode is entered.

2 Press UP or DOWN to highlight the desired menu item.

3 Press M.FOCUS to set selection.

4Press MENU to exit.

Note:

•The Menu mode is canceled if UP/DOWN, M.FOCUS, or MENU are not pressed within 5 minutes when Self Demo mode is off with no cassette tape and/or battery inserted.

•The Menu mode is canceled if UP/DOWN, M.FOCUS, or MENU are not pressed within 30 seconds when Self Demo mode is on with no cassette tape and/or battery inserted.

Getting Started

Camera Mode Menu Screen

1

2

3

4

5

6

7

8

9

10

VCR Mode Menu Screen

3

6

7

1REC MODE (page 17).

Change to desired tape speed, SP/SLP.

2SHUTTER (page 26).

Select desired shutter speed.

3LCD BRIGHT (pages 17, 20).

LCD BRIGHT SETTING sub menu is displayed. Adjust LCD monitor brightness level.

4DIGITAL EFFECTS (pages 24, 27~30, 33, 39). DIGITAL EFFECTS sub menu is displayed.

To select DIGITAL ZOOM, DIGITAL WIPE, MAGICPIX, MOTIONSENSOR, or FADE/

FILTER.

5PROGRAMMED REC (page 19). Camcorder starts and stops recording at a preset time.

6DISPLAY SET (pages 46, 47). DISPLAY SET sub menu is displayed. To select DISPLAY or MODE SELECT.

7CLOCK SET (pages 14, 15). CLOCK SET sub menu is displayed. Set the Date and Time.

8STAND-BY RELEASE (page 18).

ON : Enables quick resumption of recording from Stand-by mode.

9LIGHT MODE (page 16).

OFF/ON : Light can be set ON or OFF.

OFF/ON/AUTO : Light can be set ON, OFF, or AUTO.

10 SELF DEMO (page 7).

ON : SELF DEMO screen is displayed.

13