21
Basic Operation

Playing Back Recordings

Connections 1Set POWER to:
VCR view playback.
CAMERA view picture as it is
recorded.
2Turn TV ON and set to LINE INPUT.
See TV owners manual.
3Begin playback or recording.
Audio/
Video Out
Connect Camcorder to a TV to view
playback or recordings in progress.
Before you begin...
Connect Camcorder to power source.
Make all TV-Camcorder connections.

TV Playback or Viewing

Remove Battery lid and insert AA battery.
Do not reverse polarity.
Replace battery when tape loading/unloading takes longer
than usual.
1Turn cassette Tape Wheel in direction of
arrow to take up any slack.
2Slide RELEASE to open cassette lid.
3Insert the cassette with the window up and on
the left, then snap lid shut.
Remove Cassette
Insert Cassette in PlayPak
1Slide RELEASE and wait for lid to open.
2Push cassette out through hole in bottom of
PlayPak with your finger.
Do not obstruct cassette
reel while loading.
Allow PlayPak Load
Detector to fully retract
before using in VHS VCR. Load Detector
Load Battery in PlayPak

VCR Playback using PlayPak (Optional)

1
2
3
12
04.L453 Basic p20-22(w/o P) 02.11.28, 2:46 PM21