19
Basic Operation
Before you begin...
•Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
•Insert cassette with record tab (page 11).
•Set POWER to CAMERA.
Camera Recording
1Press MENU for MENU
mode. Press UP or
DOWN to select
PROGRAMMED REC .
2Press M.FOCUS.
(Current time is
displayed.)
Each additional press
of M.FOCUS increases
start time by 30 minutes.
3Press DOWN to select
REC TIME .
Press M.FOCUS
repeatedly to select one
of the options shown at
left.
To cancel the setup, press MENU twice.
4Press RECORD/PAUSE
to place Camcorder in
stand-by mode.
Recording will be done as scheduled.
Note:
•Start time may not be set over 24 hours from
current time.
•Camcorder shuts off at tape end, or 12 hours
after Interval Recording starts.
•To cancel, set POWER to OFF.
Set a recording start and stop time. Or,
set a 5 or 10 second interval recording
to be done each minute.
*1 Record 5 seconds each minute.
*2 Record 10 seconds each minute.
REC TIME :

Programmed Recording

4
1, 2, 3
03.L453 Basic p17-19 02.11.28, 2:46 PM19