
Sound effect
DRIVE SELECT
, , ,
ENTER
SW.LEVEL,
MIX 2CH
SRD MUSIC
CH SELECT MUTING
Dolby Digital and DTS
pDolby Digital and DTS are digital encoding systems used on DVD to carry surround sound. Both were originally developed for use in cinemas.
pThis unit automatically recognizes and decodes these systems.
Software encoded with Dolby | Software encoded with DTS can | ||||||||
Digital can be identified with | be identified with this mark. | ||||||||
this mark. |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Play a Dolby Digital or DTS source.
The Dolby Digital or DTS indicator lights.
wTo
channel) signals to 2 channels
Press and hold [MIX 2CH].
pTo cancel, press and hold [MIX 2CH] again.
pThis cannot be set while “Surround Music” or “Surround Enhancer” (➡ page 35) is set to “ON” (“ERROR” is displayed in the display window). Please set this once “Surround Music” or “Surround Enhancer” is set to “OFF”.
When “D.MIX” flashes on the display
The
RQT8655
36
Muting the sound
Press [MUTING].
“MUTING” flashes on the unit's display.
To cancel
pPress [MUTING] again or reduce the volume to minimum “VOL 0”, then raise it to the required level.
pMuting is cancelled when you switch the unit to standby.
Adjusting the subwoofer level
Press [SW.LEVEL].
Each time you press the button:
SUB WOOFER 1SUB WOOFER 2SUB WOOFER 3
SUB WOOFER 4 (factory preset) | $ |
pThe setting you make is retained.
pThis cannot be set when headphones are connected.
Speaker level adjustments
Adjust the level of the speakers so they are the same apparent level as the front speakers where you would normally be sitting and listening.
Preparation
pPress [DRIVE SELECT] to select the DVD drive. pTurn off the other sound effects.
pThis cannot be set while “Surround Music” (➡ page 35) is set to “ON” (“ERROR” is displayed in the display window). Please set this once Surround Music is set to “OFF”.
When stopped or playing discs with 2 channel or monaural audio
You can adjust the balance of the front speakers.
pYou can also adjust the L/R Surround speakers while “Sound Field Control (SFC)” or “Surround Enhancer” is set to on. Please perform the following “When playing
1Press and hold [CH SELECT].
| L | R |
|
|
|
|
|
2 Press [ , | ] to adjust the “L”, “R” | ||
balance. |
|
|
When playing
1Press and hold [CH SELECT].
LR
2While the screen above is being displayed
Press [CH SELECT] to select the speaker.
L, RCchRSchLSchSWch
$
SW: Subwoofer
pYou can only adjust SW if there is output from the subwoofer
channel. |
|
3 Press [ | ] (to increase) or [ ] (to |
decrease). | |
L, R: | Press [ , ] to adjust the “L”, “R” balance. |
C, RS, LS: L6 dB to K6 dB | |
SW: | L6 dB to K6 dB |