Panasonic SC-VK680 manual USB Play and Recording

USB — Play and Recording

ENGLISH	Play
	The USB connectivity enables you to connect and play tracks or
	files from USB mass storage class devices.
	Typically, USB memory devices. (Bulk only transfer)
	Preparation
	Before connecting any USB mass storage device to the unit,
	ensure that the data stored therein has been backed up.
RecordingandPlay	It is not recommended to use a USB extension cable.
	The USB device is not recognised by this unit.
	1 Connect the USB mass storage device (not included).
—	USB enabled device
	(not included)
USB

2Press [q, USB] to begin playback.

3Press [MENU] to display the USB menu.

4Press [e,r] and then [OK] to select the desired item. For other operating functions, they are similar as those described in “DISC OPERATIONS” ( pages 15 to 23).

Compatible Devices

Devices which are defined as USB mass storage class:

–USB devices that support bulk only transfer.

–USB devices that support USB 2.0 full speed.

Supported Formats

	File name	File extension
Still pictures	JPG 1	.jpg	.jpeg
Music	MP3 WMA	.mp3	.wma
Video	MPEG4 2		.asf

1 It may not be possible to play all the files due to the condition on how they were created.

2 For Panasonic D-Snap/DIGA

Note
Maximum number of folders	255
Maximum number of files	4000
Maximum length of folder name	28
Maximum length of file name	28

	• CBI (Control/Bulk/Interrupt) is not supported.
	• Digital Cameras that use PTP protocol or which require
	additional program installation when connected to a PC are
	not supported.
	• A device using NTFS file system is not supported.
RQTX0282	[Only FAT 12/16/32 (File Allocation Table 12/16/32) file
	• It will not operate with Janus enabled MTP (Media Transfer
	system is supported].
	• Depending on the sector size, some files may not work.
26	Protocol) devices.
	• Only one memory card will be selected when connecting a
	multi-port USB card reader. Typically the first memory card
	inserted.

Recording

You can record sound or music tracks from the disc, radio, tape and other music sources to a USB mass storage device.

Note

•This function does not work during any “RANDOM” and “REPEAT” mode selection.

•A new folder is created each time you perform a recording. Depending on the USB’s memory, the folder’s sequence may change once the recording has completed.

•All tracks are recorded to .mp3 format.

•Do not remove the device or plug out the AC mains lead while recording, data could be lost.

•Voice mixing with CD from microphone cannot be recorded.

•Recording indicator blinks while recording in progress.

Recording indicator

Front panel of this main unit

Recording of MP3 tracks

1Connect the USB mass storage device.

2 Insert the disc(s) you want to record.

3Press [DVD/CD q] and then [g] twice.

•If the disc contains mixed media ( Playing data discs, page 19)

•Recording specific disc(s) or tracks ( Program play, page 18)

4Press and hold [*, REC] followed by [USB] (main unit: [* REC, USB]) to start recording.

•“READING” (blinking)  “DISCXXX”  “REC” (blinking) will be displayed.

•“PGM” is displayed if recording in Program mode.

•Folder and file created will be named “DISCXXX”, “TRKXXXXX” respectively.

5Press [g] to stop recording.

“WRITING” is displayed for a few seconds.

Note

•MP3 file needs to be selected before recording can begin. All files in the current folder will be recorded.

•Non-MP3 files will be skipped.

•Files in subfolder will be ignored.

•No sound is output during recording. “MUTE” will be displayed if volume is adjusted.