Panasonic TC 22LR30 manual Connections, Connecting the RF in Terminal, Antenna Connection

Connections

Notes on connections

•Turn off the power supply for all components before making any connections.

•If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.

•Read the instruction manual for each system component carefully before connecting it.

Connecting the RF in Terminal

CAUTION

Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.

Getting Started

Antenna Connection

Connect the cable from Antenna to the VHF/UHF terminal on the unit.

VHFUHF

Antenna Antenna

Mixer

Cable Connection

Connect the cable supplied by your local cable company to VHF/ UHF terminal on the unit.

Note to CABLE system installer:

This reminder is provided to call the CABLE (Cable TV) System Installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Cable Box

In from CABLE

Or

Connecting the Antenna / Cable to the RF IN

Terminal (VCR)

Use this configuration when connecting the LCD TV Antenna and Cable TV system using VCR.

Connect the cable from the Output terminal on the back of the Cable Box or antenna/cable system to the Antenna input terminal on the back of the VCR.

VCR

In from cable	Or
	↑ TO VCR	↑ TO VCR

TERMINAL ON THE

BACK OF THE CABLE BOX

Incoming Cable from Antenna or Cable TV System

CABLE BOX

Note:

•When the RF coaxial cable is connected to the projection display VHF/ UHF terminal via a cable box or VCR, set the TV channel to CH3 or CH4. This does not apply when signal is input from VIDEO INPUT.

Cable / Antenna Connection

F-Type Antenna	Incoming 75Ω Cable from
	Home Antenna / Cable
Connector
	Company

Antenna

Terminal on the

Back of the TV

15