Panasonic TC 22LR30 manual Recording television programs

Recording
OPEN/CLOSE
NUMBER keys	CH ▲▼
STOP	PAUSE
	ENTER
▲▼◄►
	RETURN
	REC MODE
AUDIO	REC
	F REC
Front view
Front Display

Recording television programs

RAM DVD-R

•It is not possible to record continuously from one side of a double sided disc to the other. You will need to eject the disc and turn it over.

•When using 8 cm (3″) DVD-RAM, remove the disc from the cartridge.

•You can record up to 99 titles on one disc.

•You can record digital broadcasts that allow “one time only recording” when using CPRM (p. 70) compatible DVD-RAM discs. And you cannot record digital broadcasts that allow “one time only recording” when using DVD-R.

•DVD-RAM/DVD-R have limitations on recording (pp. 8~10).

•Recording will take place on open space on the disc. Data will not be overwritten.

•If there is no space left on the recording disc, you will need to erase unwanted titles (pp. 47, 52) or use a new disc.

•You cannot record on finalized DVD-R discs.

Preparation

• Release protection before proceeding:

- Cartridge (p. 9) RAM

- Disc (p. 60) RAM

1 Press OPEN/CLOSE on the unit to open the tray and insert a disc. (p. 34)

•Press the button again to close the tray.

•RAM When using a DVD-RAM for the first time with this unit, format it to ensure accurate recording. (Refer to “Format Disc” on page 61.)

2 Press CH ▲▼ or NUMBER keys to select the channel.

e.g., When you select channel 4

To select with the NUMBER keys:

e.g., 5: [0] → [5] 15: [1] → [5] 115: [1] → [1] → [5]

3 Press REC MODE to select the recording mode. (See next page.)

e.g., When you select “XP”

XP* SP LP EP

*To record sound using LPCM (possible only in XP mode):

Select “LPCM” in “Audio for XP Recording” (the picture quality may go down slightly). (p. 69)

4 Press REC to start recording.

•You cannot change the channel or recording mode during recording.

•You can change the audio being received by pressing AUDIO during recording.

To specify a time to stop recording

During recording

Press REC on the unit or the Remote Control to select the recording time.

Each time you press the button:

OFF 0:30 1:00 1:30

4:00 3:00 2:00

•This does not work during timer recordings (pp. 40~41) or while using Flexible Recording (p. 39).

•Recording stops and the set time is cleared if you press STOP.

•The set time is cleared if you change the recording mode or channel while recording is paused.

To stop recording

Press STOP.

•Recorded as 1 title until the position where stopped.

•DVD-RIt takes about 30 seconds for the unit to complete recording management information after recording finishes.

To pause recording

Press PAUSE.

Press again to restart recording.

38
	For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo