![](/images/new-backgrounds/1119443/119443231x1.webp)
Web browser control
What you can do with Web browser control
With the web browser, the user can access the projector for
Settings of Web browser control
Settings of projector
qPress the MENU button to display the menu.
wUse the and
buttons to display the
"Option" screen. |
| OPTION |
|
|
|
| SHUTTER |
|
| ||
e Press the ENTER button to display the | OSD |
| OFF | ON | |
RGB/YPbPr | RGB | YPbPr | |||
|
| AUTO | KEYSTONE | OFF | ON |
Option |
| RGB2 | SELECT | INPUT | OUTPUT |
| BACK | COLOR | BLUE | BLACK | |
Settings can be altered with , , | and | FRONT/REAR | FRONT | REAR | |
DESK/CEILING | DESK | CEILING | |||
buttons. |
| LAMP | POWER | LOW | HIGH |
| LAMP | RUN TIME |
| 10 H | |
Press the ENTER button when necessary changes are | NEXT | PAGE @ |
|
| |
completed. |
| SELECT:[^][@] | ENTER:[ENTER] | ||
|
| ADJUST:[{][}] | ESC:[MENU] |
Web control
ON: Enables the web browser control.
OFF: Disables the web browser control.
Web power
ON: Allows the user to turn on the power of the projector using the web browser control.
OFF: Does not allow the user to turn on the power of the projector using the web browser control.
OPTION
PREVIOUS PAGE ^ |
|
|
FAN CONTROL | STANDARD | HIGH |
WEB CONTROL | OFF | ON |
WEB STANDBY | OFF | ON |
WEB PASSWORD |
|
|
CONTROL KEY | OFF | ON |
FUNC1 | MUTE | KEYSTONE |
SET ID | ALL |
|
AUTO POWER OFF | DISABLE |
|
Web password
The user can set a password using up to 16 alphanumeric SELECT:[^][@] | ENTER:[ENTER] | ||
characters and symbols. | ADJUST:[{][}] | ESC:[MENU] | |
|
| ||
Use | buttons to change letters, use | buttons to move the digit. |
|
No password has been set as a factory default. |
|
|
Settings of personal computer
q
wFrom "Connection", open "LAN setting", clear all the check boxes of
options and click the "OK" button.
Click the "OK" button to close the
Note:
•If the proxy server is already used, in "Advanced Settings" set IP address of the connecting projector as an exception not to use the proxy server.
eIn "Security", set the security level to the "Default level". Or otherwise, from "Custom level" enable "Active script".
116