Menu screen
Press Projector control or SD control.
Projector control
Notes:
•When the power is turned ON, confirm that the indicator lamp is lighting, then go to the top screen again.
•Immediately after power turning ON, it may happen to be unable to connect with the projector. If this is the case, wait for a while and then try connection again.
•Either basic control or option control will not function unless Web power is set to ON in the option setting of the projector.
•Power ON operation will not occur unless Web power is set to ON in the option setting of the projector. At this moment, however, the projector control screen has the same indications as those displayed when normal operation is available.
SD control
qSwitch to “SD CARD” using the input switching (RGB) button
on the projector or the remote control.
Switching is also available on the screen of the projector control.
wClick “SD control” of the menu. e Select from folders in the SD card.
r Select form control modes (presentation and list).
Presentation
The NEXT button will project the next image and the PREV button the previous image.
List
A list of files that can be replayed will appear. Press the button located at the right of the desired file for replay, and the image will be projected.
121
