![](/images/new-backgrounds/1119443/119443233x1.webp)
Note:
•For Netscape, go to “Edit” → “Setting” → “Details” and enable JavaScript.
Operation of Web browser control
Starting Web browser control
Start the browser (Microsoft Internet Explorer is used as an example here), and enter the IP address assigned to the projector.
Web browser control will be started.
Note:
•Web browser control can also be started from Wireless Manager 2.0.
While Wireless Manager 2.0 is running,
Disable the use of the proxy server (to use the proxy server, refer to "Settings of Web browser control" on page 116).
Specify the IP address that has been assigned to the projector in the network setting.
Select Japanese or English.
Enter the password if any has been defined.
Note:
In case you forget the password, assign a new password to the projector (For security reason, the projector does not show the password that you have been using).
Top screen
Note:
•The top screen may not be displayed depending on the browser. In that case, close the window first and start again the Web browser control, or press the "CLT" + "R" buttons at the same time.
117