118
Projector control
Click "Projector control" in the menu.
The user can make various settings of the projector.
Basic control screen Notes:
•
When the power is turned ON, the
window is closed for the moment. Then,
confirming that the light is turned on, start
operation again from the top screen.
•Connection with the projector cannot be
established just after turning on the
power. In this case, wait for a while and
try connection again.
•
If Web control is not turned ON in the
option setting of the projector, neither basic
control nor option control will operate.
•Web power is not turned ON in the
option setting of the projector, it will not
be powered on. However, the projector
control screen will display still the same
content as shown when the projector
operates normally.
Option control screen Note:
•
If the projector does not work as
controlled, ensure that the Web control is
set to ON in the Option menu.
Monitor information screen
When power is turned ON:
When the system is in Web standby state:
Note:
•Monitor information is updated at regular intervals. If you go to "Display" and press
the "Refresh" button, you can check the current and accurate information.