39
Basic Operation
Color Hue Setting (color
temperature)
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
COLOR
(S-VIDEO/VIDEO/YPBPRonly)
Press the Hbutton to make the
color more vivid in tone, and press
the Ibutton to make the color
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the
picture. Press the Hbutton to make
flesh tones more greenish, and
press the Ibutton to make the
flesh tones more reddish.
BRIGHT
This adjusts the darker areas (black
areas) in the picture. Press the H
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the Ibutton if black areas are
too light (grey rather than black).
CONTRAST
This adjusts the contrast of the
picture. Press the Hbutton to make
the picture brighter, and press the
Ibutton to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)
SHARPNESS
Press the Hbutton to make the
picture details sharper, and press
the Ibutton to make the picture
STANDARD
HIGH
LOW
STANDARD
HIGH
LOW
details softer.
Noise Reduction (NR)
(When S-VIDEO/VIDEO/YPBPR
signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction),
except for 750p (720p), HDTV60
(1080i/60) and HDTV50 (1080i/50)
signals. To strengthen the effect,
press the Hbutton. To turn it off , set
to “0” by pressing the Ibutton.
TV SYSTEM
(S-VIDEO/VIDEO only)
AUTO1 The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2 The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
NOTE:
BThis should normally be set to
“AUTO1” or “AUTO2”. If the
signal is of such poor quality that
the correct format cannot be
automatically distinguished,
change the setting manually to
the required TV system.