40
WHITE BALANCE R/G/B
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised. Press the Ibutton to
make the selected color lighter.
Press the Hbutton to make the
selected color stronger.
Projecting sRGB-
compatible pictures
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully, make
the following settings.
#Press the FF or GG button to
select “PICTURE MODE”, and
then use the II or HH button to
select “NATURAL”.
$Press the FF or GG button to
select “COLOR TEMP.”, and
then use the II or HH button to
select “STANDARD”.
%Select the STANDARD from the
menu screen by pressing the
FFor GGbuttons and then press
the ENTER button.
&Select the LAMP POWER item
in the OPTION menu by
pressing the FFor GGbuttons
and set to “HIGH” by pressing
the II
or HH
buttons. (pages 46
and 47)
NOTE:
BsRGB is only enabled when RGB
signals are being input .