7.Select Search Mode / Scan Mode with / and press OK to access.

8.Set with / and press OK to store.

●● Scan Mode

Full:

Scans the whole frequency range.

Quick:

Scans the suitable frequency for the selected satellite.

●● After settings, select Start scan with / and press OK to search.

9.The confirmation screen is displayed and press OK to start Auto Setup. (Settings are made automatically.)

●● When the operation is completed, the channel at the lowest position will be displayed.

■■DVB-C, DVB-T, Analogue

1.Select Auto Setup with / and press OK to access.

2.Set DVB-C Auto Setup Settings with / / / and press OK to store. (DVB-C)

●● Scan Mode Full:

Scans the whole frequency range. Quick:

Scans the suitable frequency in your country.

●● Normally set Frequency, Symbol Rate and Network ID to Auto. If Auto is not displayed or if necessary, enter each value specified by your cable provider with Numeric buttons.

●● After settings, select Start scan with / and press OK to search.

3.The confirmation screen is displayed and press OK to start Auto Setup. (Settings are made automatically.)

●● When the operation is completed, the channel at the lowest position will be displayed.

- 101 -